Ultrasonic Cutter (UC-60N-03)
The UC-60N ultrasonic cutter system operates at 40 kHz per second for smooth and easy cutting of a variety of different materials. The system is equipped with the following features:
- Two different functions for polishing (power-saving mode) and cutting & carving applications (full-power mode).
- Output setting adjustment to adapt to a variety of operations and materials.
- Internal alert system to notify user of short or damaged.
- Foot switch on/off control.
- Protective cover to ensure safety when not in use.
Cutting applications include, but are not limited to:
- Printed circuit boards
- Natural fibers
- Synthetic fibers
- All forms of paper and bottom films
- Rubber and silicon
- ABS, PP, PE, and other plastic sheets (< 2mm thickness)
Take a few minutes to know more about the Ultrasonic Cutter UC-60N-03!
our service
Provide the most labor-saving cutting tools.
Specification
- Dimensions (Control Unit):
220 L*165 W*130 mm W
-
Power Source: AC 90- 240V, 50/60 Hz (Full voltage)
-
Current Consumption: ~0.5 A
-
Power Consumption: ~60 VA
-
Output Power: 20-40 W with LED display of power
-
Output Frequency: 40 kHz
Accessories
-
Foot switch on/off control
-
Hex Keys
-
Set Screws
-
Steel Blades
-
Protective Gloves
-
Transducer Handpiece
Operating Mode
-
Intermittent Mode: (with use of the foot switch)
-
Continuous Mode: (without use of the foot switch)
Free Services
- On-Site Cutting Test
- Sample Cutting Test (to send the sample, please check out address and contact us)
Cutting Demonstration – Optical Disc
Cutting Demonstration – ABS Plastic Case